TT-H04A toroidal winding machine

• it's an accurately and reliability digital toroid winding machine

Hi-tech shuttle for highest efficiency.

Separate speed controls for loading and winding.

Accurately count length of loading by limited-switch.

Accurately count turns of winding by photo-electricity sensor.

Programmable winding direction, winding returns range (Turns or Angle) and segment winding angle.

Accurately wire spacing by programmable controller.

Memory capacity accommodates 999 sequences of parameters with off-power memory retention.

Machine Type	TT-H04A	TT-H06A
SPEED	1500RPM	1200RPM
COIL O.D.	10~60mm	10~60mm
MIN.FIN. I.D.	4mm	5mm
MAX. HEIGHT	25mm	45mm
WIRE SIZE	0.05~0.6mm	0.05-0.8mm
SHUTTLE DIAMETER	98mm	135mm
SHUTTLE WIDTH	2.4 2.8 3.0 3.4 4.7 6.3 7.9	4.7 6.3 7.9 9.5 12.7 15.6
Can respectively book winding heads of GORMAN slider control, belt and line sliding while giving the order.

TT-H04A and TT-H06A have combined the US GORMAN winding heads with Taiwan electronic control and have the following properties:
•WINDING MOTOR: 370W AC motor, variable frequency drive, active break with electromagnet.
•SPREAD MOTOR: Stepping Motor
•POWER SOURCE: AC220V  +10%, 50/60 Hz
•Hi-tech shuttle for highest efficiency
•Separate speed controls for loading and winding
•Accurately count length of loading by Photoelectric sensor switch
•Accurately count turns of winding by OMRON  sensor
•Programmable winding direction, winding returns range (Turns or Angle) and segment winding angle
•Accurately wire spacing by programmable controller
•Memory capacity accommodates 999 sequences of parameters with off-power memory retention for more than ten years.